Acamprosate and alcohol: I. Effects on alcohol intake following alcohol deprivation in the rat

Acamprosate (calcium-acetyl homotaurinate) is a new compound in the treatment of alcoholism. Its efficacy has been proven in several clinical trials and registration is now pending in most European countries. The basic mechanisms by which acamprosate elicits its anti-craving action, thereby leading to reduced relapse rates, is not known at the moment. In the present study we describe a rat model of long-term alcohol-drinking which mimics relapse behavior in human alcoholics. The effect of acamprosate was studied in this model. Wistar rats had a free choice between water and alcohol solutions of different concentrations (5, 10, 20% v/v). After two months of continuous alcohol access, rats were deprived of alcohol for three days. Following this deprivation phase, all alcohol solutions were presented again. This procedure was repeated monthly for the following six months. The rats consumed 3.5 +/- 0.3 g/kg alcohol a day. After alcohol deprivation, alcohol intake rose to 5.2 +/- 0.3 g/kg per day resulting in blood alcohol levels of 30 +/- 6 mg/dl. Interestingly, the addition of quinine to the alcohol solutions or the additional presentation of a 5% sucrose solution did not affect the alcohol-deprivation effect after eight months of this intermittent alcohol exposure. However, when acamprosate (50-200 mg/kg i.p.) was administered twice daily, alcohol-drinking following an alcohol-deprivation phase was decreased dose dependently. Given at the highest dose alcohol intake even dropped significantly below baseline drinking. Together, these results show that acamprosate effectively diminishes the alcohol-deprivation effect. Furthermore, the described model seems to be a suitable animal model to screen compounds for their anti-relapse properties and subsequently for their anti-craving action.     

Laboratory Experiments on Electroosmotic Dewatering of Vegetable Sludge and Mine Tailings

Vegetable wastes in the food industry are costly lo handle because of their high moisture content. while mill plant tailings in the mining industry contain large quantities of ultralines which are difficult io dewater.This paper describes the results of small scale electmosmotic dewatering (EOD) and combined field dewatering (CFD) measurements with model vegetable sludges and mine tailings.     

肝癌碘油栓塞后肝区平片所见碘油沉积量与疗效关系

本文分析了90例肝癌肝动脉灌注化疗碘油栓塞后,肝区平片所见碘油沉积量和疗效的关系。碘油沉积分为多,中,少三组,从ATP下降,肿瘤缩小率及一年生存率三方面比较。结果沉积多的与中等组三项都有显著差别;沉积中等的与少的组差别不明显。说明碘油沉积要达到一定的量后,疗效才会显著提高。同时分析了影响碘油沉积的几个因素。     

Transconductance and mobility of Si:B delta MOSFETs

Delta-doped MOSFETs have been fabricated in MBE-grown silicon using for the first time boron as the dopant within the delta layer. Current-voltage characteristics have been measured, and secondary ion mass spectrometry (SIMS) is used to confirm the location of the delta layer and the extent of layer broadening by diffusion during processing. Precise threshold voltages of the devices are difficult to determine since the devices (which all operate in depletion mode) take several volts to switch off. Transconductances of the devices have been measured, and it is shown how analysis of these results can yield estimates of the carrier mobility for transport along the delta layers despite the uncertainty in the threshold voltage. A clear transition is observed in the results which is attributed to the formation of a parasitic surface-channel field-effect transistor, providing conclusive evidence that the devices are conducting along a delta channel for part of the measured range of applied gate biases     

193-nm lithography

The trend in microelectronics toward printing features 0.25 μm and below has motivated the development of lithography at the 193-nm wavelength of argon fluoride excimer lasers. This technology is in its early stages, but a picture is emerging of its strengths and limitations. The change in wavelength from 248 to 193 nm will require parallel progress in projection systems, optical materials, and photo-resist chemistries and processes. This paper reviews the current status of these various topics as they have been engineered under a multiyear program at MIT Lincoln Laboratory     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Study of the nozzle flow in a cross-flow turbine

An investigation of the flow inside the nozzle of a Cross-Flow turbine, which is a hydraulic turbine where the rectangular water jet issuing from the nozzle crosses the rotor blades twice, is presented here. Part of the investigation consisted in the experimental measurement of the static pressure distribution on the inside walls of two different nozzle configurations, both with the nozzle mounted alone and in the presence of a rotor. The tests performed in the presence of a rotor included the measurement of efficiency and covered a wide range of working conditions around the best efficiency point. The analysis of the results obtained in this way give us an indication of the influence of the turbine non-dimensional volume flow rate on the flow inside the nozzle and the way it affects the reaction degree of the machine and its efficiency level. Although most of the tests were carried out with a 25-blade rotor, one of the analysed nozzle configurations (that with an inside vane) was also tested with a 10-blade rotor, permitting the assessment of the effect the number of blades has on the flow in the nozzle.The flow inside the nozzle with no inside vane was numerically analysed using a method based on a Schwarz-Christoffel conformal transformation of variables. The numerical results show a fair agreement with the experimental data collected when the rotor was not present. A qualitative discussion of some of the losses occurring in the nozzle is advanced based on the computer results, and its conclusions are used for explaining the poor performance of the nozzle with no inside vane.